The
K-Example 0.7 Narrow Aisle Trucks from Linde Material Handling enables high turnaround capacity for order picking and handling processes in high rack warehouses. The powerful drive trains make this possible, as the truck can move and lift at the same time. Also, even at high lift levels the speed remains high and a high level of residual lift capacity is available. Various assistance systems are available which help to navigate accurately through warehouse or to avoid obstacles. Not least, Linde System Control improves the process: Depending on the version, the system adjusts the lift and travel speed according to the weight being transported. There are various versions of the mast, chassis, battery and cab for the very narrow aisle trucks, which can be combined according to usage requirements. There are around 10 million possible truck configurations.
Safety:
- The driver must make contact with three points, otherwise they will be unable to move the combination forklift: the hand sensors on the control panel as well as the dead-man’s switch on the cab floor. This prevents incorrect operation which may lead to accidents. For the safety of the driver, there are also electrically monitored side cabinets which must be closed when the platform height is above 1.2 meters. The optional personnel protection system continuously scans the aisle and stops the truck if people are in the vicinity. For additional safety, an optional Aisle Safety Assistant detects RFID-tagged or barcode-marked unevenness, obstacles in the shelving, on the floor or on the ceiling and automatically limits the speed, lift height or fork extension at these locations. Service technicians can program general travel, lift and lowering end stops in the truck system, which can be adjusted. The standard, load and weight variants within the 'Linde System Control' assistance system assist the driver by adjusting speed and optimizing driving behavior depending on the lifting height, load recognition and load weight.
- Three-point operation
- Electrically monitored side cabinets
- Aisle Safety Assistant
- Pre-adjustable travel, lift and lowering end stops
- Optional personnel protection system
- Linde System Control (Standard, Load, Weight)
- Dynamic Reach Control
- Rescue Alarm
Specifications:
Model |
Load capacity/Load |
Battery voltage/rated capacity (5h) |
Lift |
End aisle width, with/without load |
Travel speed, with/without load |
K-Example 0.9 |
0.9 (t) |
80 / 840 (V)/(Ah) |
7200 (mm) |
4392 (mm) |
14 / 14 (km/h) |
K-Example 1.5 |
1.5 (t) |
80 / 930 (V)/(Ah) |
15650 (mm) |
4298 (mm) |
11.1 / 11.1 (km/h) |