Unity Earthtech

The R140LC-9 Construction Excavator is built for maximum performance and ease-of-operations even in the most demanding environments. 9 series hydraulic circuit are designed to deliver high digging forces and fast loading cycles.

Powerful Engine:

• The heavy duty Kirloskar 4R1040T engine has a gross power of 105 HP @ 2,200 rpm and offers low operating cost, low fuel consumption and extended scheduled maintenance interval of 500 hours.

Power Boost Control System:

• It helps to meet extreme power requirement when working with peak loads. If high digging pressure is observed for more than 1 second, the controller automatically boosts digging forces to meet the job condition.

Strong Boom & Arm:

• Made with high tensile strength steel, the boom & arm are reinforced with steel bearings and internal baffle plates to maximize impact strength.

Automatic Engine Overheat Prevention:

• This feature monitors coolant temperature and automatically lowers engine speed if it overheats, preventing premature failure.

The R130 Smart Plus Construction Excavator takes the ease of operations and profitability to greater heights. Best suited for construction works and land development, this Hyundai machine comes power-packed with features that ensure low fuel consumption, low operator fatigue, fast operations and much more.

Powerful Engine:

• The heavy duty Kirloskar 4R1040T engine has a gross power of 94 HP @1950 rpm that offers a powerful performance and low fuel consumption along with low noise levels.

CAPO System (Computer Aided Power Optimization):

• The advanced CAPO (Computer Aided Power Optimization) system tunes engine and pump power to optimum level. Multiple modes selections are available for various workloads, maintaining high performance while reducing the fuel consumption.

Strong Boom & Arm:

• Made with high tensile strength steel, the boom & arm are reinforced with steel bearings and internal baffle plates to maximize impact strength

Anti-Restart System:

• This feature prevents the starter from restarting during engine operation if the operator accidently turns on the start key. Thus preventing accidental damage to the engine.

The R340L Smart Mining Excavator has a variety of features that ensure outstanding productivity and faster operation to perform 3-shift operation. The buckets are specially designed to enable faster loading and unloading.

Reinforced Upper & Lower Frame:

• The frames are built to withstand tougher conditions by enduring external shocks and heavy workloads, thus extending machine life.

The R230LM Smart Mining Excavator is specifically built for Quarry and mining operations of marble and granite. This high-performance machine passes all the benchmarks required to perform in such harsh conditions: high power, high structure strength, great stability and high durability.

Digital Cluster with Color Display and Work Mode Selection:

• The digital cluster displays key machine information like oil temperature, coolant temperature, and other vital statistics. Optimized performance is achieved by letting operator to choose between two power modes, three work modes and two User Modes.

Negative Flow Control for Fast Response:

• When a component is not in operational, a control lever stroke maintains high standby pressure of hydraulic oil in the hydraulic hoses rather than sending it back to the main control valve. It not only results in faster response time of the hydraulic component, but also fuel savings.

Heavy Duty Boom & Arm:

• Made with high tensile strength steel, the boom & arm are reinforced with steel bearings and internal baffle plates to withstand wear and tear, which extends component life.

The R215L Smart Mining Excavator is the machine for operations where high performance is the ultimate objective. With a high performing engine, high stability on uneven surfaces, high operating weight, bigger buckets and improved operator comfort and convenience, this machine promises maximum productivity.

Powerful Engine:

• The water-cooled, 4-cycle diesel, 6-cylinder Cummins 6BTAA engine has a gross power of 148 HP @2000 rpm that not only offers optimized fuel and lube oil consumption but also low noise levels. It delivers outstanding performance even in high-heat, humid and dusty conditions.

One-Touch & Auto-Idle:

• One touch deceleration switch on top of LH joystick lowers the engine RPM when selected. The saves fuel by regulating pump and engine. Auto Idle function moderates engine RPM to idle state when machine remains idle for 4 sec by enabling MCU to send a signal to engine. This in turn reduces fuel consumption and operation cost.

The R245LR Smart Construction Excavator comes with a long-reach attachment of 14.5 meters built to perform with great stability and ease. The excavator is widely used in application like well digging for agriculture, Canal work and river cleaning.

Performance:

• The digital cluster displays key machine information like oil temperature, coolant temperature, and other vital statistics. Optimized performance is achieved by letting operator to choose between two power modes, two work modes and two User Modes.

Fuel Saving Kit:

• The sensors in this kit monitor undue loads and send signals to the Main Control Valve to cut down unnecessary fuel consumption. It helps to increase fuel efficiency.

Durability:

• New forged ring body in lower frame enhances the durability, structural integrity and increases the machine life.

Automatic Engine Heat Prevention:

• This feature monitors coolant temperature and automatically lowers engine speed if it overheats, thereby preventing premature failure of the machine.

The R210 Smart Construction Excavator is built for high profitability. Its high-tech features enables operators to do their job with great ease, its low fuel consumption and low maintenance adds to higher returns

Electro Hydraulic Flow Control:

• To ensure best productivity, the Variable Displacement Axial Piston type pump with electro hydraulic control function provides a wide range of flow at various workloads. The open center design of the main control valve provides fast synchronization between joystick and hydraulic components. Thus increasing speed and smoothness of operations.

One-Touch Deceleration & Auto-Idle:

• One touch deceleration switch on top of LH joystick lowers the engine RPM when selected. The saves fuel by regulating pump and engine. Auto Idle function moderates engine RPM to idle state when machine remains idle for 4 sec by enabling MCU to send a signal to engine. This in turn reduces fuel consumption and operation cost.

Strong Boom & Arm:

• Made with high tensile strength steel, the boom & arm are reinforced with steel bearings and internal baffle plates to maximize impact strength.

Safety:

• This feature monitors coolant temperature and automatically lowers engine speed if it overheats, thereby preventing premature failure of the machine.

The R85A Smart Construction Excavator is the ideal choice for agricultural and construction-related earth-moving activities. It comes with best-in-class technical specifications and features so you can get maximum work done in minimum time and with minimum fuel consumption. Moreover, you can customize the machine with different attachments to suit your requirement

Powerful Engine:

• The heavy duty Kirloskar 4R1040NA engine with a gross power of 76 HP @2200 rpm offers high performance and low fuel and lube oil consumption. The engine also offers high torque, which ensures easy in cutting operation.

Self-diagnostics System:

• The Main Control Unit automatically displays machine malfunctions on the LCD monitor. This makes it very easy to check machine health and troubleshoot problems.

Engine Overheat Prevention:

• This feature monitors coolant temperature and automatically lowers engine speed if it overheats, preventing premature failure of the machine.

The R 35 Z-9 Mini Excavator is the machine made for agriculture and civil earth-moving activities. Its specifications and features are best-in-class. With this machine, you can be assured that you will always get maximum work done at minimum fuel consumption.

Features:

• Optimise Efficiency
• Maximise Profitability

Powerful Engine:

• The Tier 4-certified Yanmar 3TNV88 engine is built with a gross power of 27.3 HP @2200 rpm to provide high power output, optimum fuel economy, and reduced noise.

Boom Swing Function:

• This function is designed for easier work in congested residential and urban areas. The boom can be offset left or right within an operating range.

Upper & Lower Frame:

• Low stress, high strength steel is integrally welded to form a stronger, more durable upper and lower frame. Structural Integrity was tested by way of Finite Element Methods analysis and long term durability test.

Boom Safety Holding Valve:

• The Holding Valve keeps attachments locked and prevents them from drifting due to gravity during prolonged overhanging.

Best in class performance, designed for smart work. Engineered to excel in construction, infra and mining operations